Furnaces, reformers, compressor houses, substations, pipe racks on three levels: the places where a missed reading costs the most are the hardest to walk often. WOLKER puts an inspection robot on the route, with the sensors your checklist needs, and delivers readings and exceptions the same way every time. Four-week pilot about AED 75,000.
Runs on a DEEP Robotics quadruped — X30 Pro or Lynx M20, carrying the sensing pack — thermal PTZ, acoustic, gas, RTK. Authorised DEEP Robotics distributor in the UAE.
Discuss a plant roundReplies on WhatsApp, same day
Where the robot can go
The inspection platform climbs stairs up to 45 degrees, handles grating, gravel and wet floors, and works from -20 to +55 °C in IP67 enclosure. Elevated platforms reached by stairs are on the route; ladders and vertical cages are not.
Typical route: 2–3 km, 60–90 minutes, dozens of inspection points with a defined viewpoint for each, then back to the dock to charge. Several rounds a day are normal.
Hazardous-area classification is checked per plant before anything is promised: the standard platform is not certified for zoned areas, and the route is drawn around them or the task is declined.
Sensors on the robot
Radiometric thermal camera with zoom: motor and bearing temperatures, hot spots on panels and cable terminations, refractory and insulation loss, reading a gauge from a distance.
Gas sensing: CO, combustible gas and H2S modules as the plant requires, logged by location along the route.
Acoustic imaging: compressed-air and gas leaks, partial discharge on switchgear — pointed by the robot at each panel or flange.
Video and photo: every point gets a frame; valve positions and gauge faces are recorded for the shift log.
Contact vibration is taken by the operator on the same round where the checklist needs it; the figure goes into the same report. See sensor set.
Your checklist, not ours
We take your inspection checklist — the points, the acceptable ranges, the frequency — and build the robot route and the report from it. The operator sees the same list; exceptions are flagged against your limits.
Readings and exceptions can be pushed to your CMMS or historian through an API, so a high reading opens a work order the way a manual entry would.
Reports are issued within 48 hours of the round and sealed with a hash; trend graphs per asset appear once three rounds exist.
Pilot before purchase
Week 1: route survey, mapping, sensor set agreed, dock installed. Weeks 2–4: rounds on your schedule, integration into one system, weekly review. Hand-over: evaluation against the agreed criteria, a cost per round and a purchase or service proposal.
About AED 75,000 for the four weeks within the UAE; a two-day proof of concept from AED 18,500 is the lighter entry. Both are on POC and pilot.
After the pilot the plant can buy the robots with deployment, training and annual maintenance — see robots and service and parts — or keep the rounds as a service.
Next step
Send the location, the rooms or zones, and what your checklist asks for; we reply with a scope and a date. Discuss a plant round
Updated 15 November 2026. Prices in AED exclude 5% UAE VAT and cover sites within the UAE.