Home / Inspection / Sensors

One round, five readings.
Each with a use.

The value of a robot round is the sensor set it carries and the way readings are tied to a point on the route. This page lists what is on the platform today, what each sensor is good for and what it is not.

Runs on a DEEP Robotics quadruped — X30 Pro or Lynx M20, carrying the sensing pack — thermal PTZ, acoustic, gas, RTK. Authorised DEEP Robotics distributor in the UAE.

Ask about a sensor configuration
Inspection robot with thermal camera on an industrial route
Scheduled. Instrumented. Documented.

Thermal

Radiometric camera on a pan-tilt head with zoom

Temperature of every pixel, not only a colour picture; hot spots on breakers, terminations and busbars; motor and bearing temperatures; refractory and insulation loss; reading an analogue gauge from a distance with the zoom.

Good for: electrical rooms, mechanical plant, process equipment, data halls. Not a substitute for certified thermography where an accredited certificate is required — that is coordinated with an inspection body.

Gas

Modules chosen per site

Carbon monoxide, combustible gas and hydrogen sulphide are the common set; oxygen and refrigerant modules are added where the site needs them. Readings are logged with location along the route.

Good for: battery rooms, generator rooms, plant rooms, confined-space pre-checks before a person enters. Not a fixed gas-detection system and not a replacement for one.

Acoustic

Imaging array for leaks and discharge

Compressed-air and gas leaks sized by cost per year; partial discharge on switchgear and cable terminations before it becomes heat; pointed by the robot at each panel or flange from the same spot every round.

Good for: compressor houses, pipe racks, substations. See the fixed-price air-leak audit.

Video, photo and position

Evidence for every reading

Each point gets a frame; valve positions, gauge faces and door states are recorded. Position comes from the robot's own mapping, so the same point is found again without markers.

Contact vibration is taken by the operator on the round where a checklist needs it and goes into the same report; a vibration module on the robot is quoted per project.

How it is delivered

Readings tied to points, points tied to assets

Every reading carries asset ID, location, time, value and the evidence frame. The report lists exceptions against your thresholds; the API delivers the same fields. See integration and what you get.

Next step

Tell us the site and the route

Send the location, the rooms or zones, and what your checklist asks for; we reply with a scope and a date. Ask about a sensor configuration

Updated 15 November 2026. Prices in AED exclude 5% UAE VAT and cover sites within the UAE.