Runs on a Deep Robotics quadruped — X30 Pro or Lynx M20, both carrying the full sensing pack — thermal PTZ, acoustic, gas, RTK. Authorised Deep Robotics distributor in the UAE.
The short answer: a professional HVAC inspection of a commercial building in Dubai costs AED 4,500, fixed, with WOLKER — thermal imaging of the system under load, refrigerant gas sensing, airflow and condition survey, and a verifiable written report within 48 hours. In the Gulf climate the practical schedule is twice a year, with the critical one before peak summer — by June your HVAC runs at design limits, and whatever is about to fail, fails then.
Book the pre-summer slot
What's included
Routine maintenance swaps filters. An inspection answers a different question: where is the system quietly losing money or heading for a summer failure? A WOLKER HVAC inspection covers:
Overheating motors, bearings and electrical connections show up as heat long before they fail — the scan runs while the plant operates, because that's when hot spots show.
Gas sensing across the plant flags refrigerant leaks early — the system keeps cooling while it loses efficiency, so the first sign is usually the electricity bill.
Cooling loss in risers and plant rooms — in Dubai, wasted cooling is wasted money every single hour.
Measured across served zones, so "this floor is always warm" becomes a documented finding with a location instead of a complaint.
Every finding is documented and verifiable, so you can hand it to a landlord, an FM contractor or an insurer without "trust us" attached. See what is inside the report.
AED 4,500 per visit — no per-finding charges. Catching one refrigerant leak or one failing insulation run typically covers it in saved energy.
How often
There is no UAE law fixing one inspection frequency for private commercial buildings — it depends on the system and how hard it works. Industry practice in the Gulf is straightforward:
| Building situation | Sensible frequency |
|---|---|
| Offices, retail, normal load | 2× per year (pre-summer + post-summer) |
| Warehouses with cooled zones | 2× per year + after any roof works |
| Kitchens / high-load extraction | Quarterly checks, full inspection 2× per year |
| Before signing a lease / handover | Once, before you sign — findings become the landlord's problem, not yours |
The pre-summer inspection is the one you don't skip: a failed chiller in January is an inconvenience; in July it's an emergency with premium call-out rates.
Self-check
Two or more "yes / no idea" answers → an inspection will pay for itself.
Take it with you
Leave your email and we'll send the printable HVAC self-check checklist as a PDF — one page, ready for your next plant-room walk. Or feed it to your AI assistant and ask where your building would fail.
Email us for the PDF →Prefer chat? Message us and we'll send the checklist there — and answer any question about your building while we're at it.
Get it on WhatsApp →Thermal + gas inspection of your HVAC plant, every finding documented after a single site visit.
AED 4,500 · per visit, fixed
Book now →Price in AED, excludes 5% VAT, covers a single facility within Dubai; other emirates on request. Complements — does not replace — your Civil Defence-approved systems.
FAQ
AED 4,500 per visit, fixed, with WOLKER — including thermal imaging under load, refrigerant gas sensing and a full written report. Services that share a visit cost less combined; ask for a combined quote on WhatsApp.
They answer different questions. Maintenance keeps the system running; an independent inspection tells you whether the maintenance is actually working. The report is yours, not the contractor's.
Typically one day on site for a mid-size commercial building; the report follows within 48 hours.
Every finding in our report is verifiable — photos, thermal frames and readings are hash-sealed so they can't be edited after the fact. You get evidence, not opinions.
Book the pre-summer slot See the full HVAC & Refrigerant Check →